Best Sticky Bra Application for Maximum Breast Lift

Larger than a standard pasty or nipple cover, Bring It Up Breast Shapers are designed to both cover and LIFT!  The Breast Shaper is the thinnest silicone bra on the market, with beveled edges that blend perfectly into your skin, making them undetectable even under super sheer apparel. Breast Shaper adhesive bras are super easy to put on and painless to remove. For safety, comfort and wearability, breast shapers have no adhesive in the area surrounding the nipple and areola. 

PRE-APPLICATION: Skin must be clean. WASH HANDS. No oils, lotions, powders, make-up, or sunscreen on the skin before application of the breast shaper.  Make sure to check out the Pre-Application tips and tricks in our previous blog post "Skin Prep for Applying Sticky Bras for Maximum Lift and Hold".  

Application for cup sizes A-D

1. Locate center of breast shaper where there is no adhesive and drop nipple into that area.
2. Press silicone down around the breast and adjust symmetry and comfort.
3. Grab the tab at the top of the shaper and lift to a comfortable position
4. You may create a fold in the skin at maximum lift
5. Press and hold for 30 seconds to warm the silicone. You can also warm the silicone with your hairdryer if you are in a heavily airconditioned room.
6. Reposition as desired.

Application for cup sizes DD+

1. Check size chart to make sure that you are in the correct size.
2. If indicated, apply the Instant Breast Lift Tape first before applying the breast shaper.
3. Locate center of breast shaper and drop nipple into that area.
4. Press silicone down around the breast and adjust symmetry and comfort.
5. Grab the tab at the top of the shaper and lift
6. The silicone will stick easily to the breast lift tape and can be repositioned for higher lift
7. Press and hold for 30 seconds (or longer if shaper is cold) to warm the silicone. You can also warm the silicone with your hairdryer if you are in a heavily airconditioned room.
8. Reposition as desired

Now you are ready to get dressed in the strapless, backless, side-less outfits without any need for a bra!😊

REMOVAL:

Taking care not to touch the adhesive, pull the shaper off of the breast from the beveled edges.  Place them back onto the liner that they came with and put them into the original box.  If you don’t have the box, we recommend that you put them on the liner and then into a plastic Ziplock bag.  If you have lost the liners, you can put the shapers sticky side down in the Ziplock bag, adhering them to the inside of the bag and zipping it closed to keep them clean.

The less you touch the silicone the longer the shapers will last.  Dirt, oil, make-up and powder degrade the stickiness of the bra cups so please handle as little as possible and only with clean hands.